CANADA




e-STUDIO478S
50 PPM Monochrome A4-Size MFP
Copy, Print, Scan & Fax – Standard
650/2,300 Paper Capacity (Std./Max)
Compact Design
Customizable Workflow
Productivity
Monochrome Print Speeds up to 50 PPM
Single Pass Duplexing Automatic Document Feeder
Scan speed Up to 100 IPM Duplex, 50 IPM Simplex
Solutions Ready
Energy Star Certified
High compression PDF scanning (Slim PDF)
Stapler finisher
Universal Print Driver
Image Quality
1200 x 1200 dpi print resolution
2,400 dpi image quality
Operability
7 inch tilting color control panel for easier operation
Remote VNC (MFP operable via PC, Tablet or Mobile Device
Voice Guidance
Control Panel MFP hard keys (buttons)
Fax Standard
Universal Print Driver common with all current Toshiba e-BRIDGE MFPs
Serviceability
Easy to Maintain
High Yield Consumables
Max MCV of 175K pages
Copy Process: Indirect Electrostatic Photographic Method/OPC/LaserPrinting/Heat Roller Fusing
Display: 7” Color TFT Touch Screen Tilting Display
Copy Speed: 50 PPM (LT)
First Copy Out: As Fast as 6 Seconds
Warm-Up Time: Approx. 20 Seconds
Copy Resolution: Up to 600 x 600 dpi
Stack Feed Bypass: 3.0” x 5.0” to LG, Envelope
Multiple Copying: Up to 999 Copies
Paper Capacity: Standard 650 Sheets/Max. 2,300 Sheets
Original Feed: Standard 100-Sheet DADF
Max. Original Size: LG (8.5" x 14")
Paper Feed Sizes: LG (8.5" x 14")
Paper Weights: Drawers: 16 – 32 lb Bond, Multipurpose Tray: 16- 58 lb Bond Duplex Standard Automatic Duplex Unit: 16 – 24 lb Bond
Reproduction Ratio: 25% to 400%
Max Duty Cycle: Max. 175K Month
Weight Approx. 49.2 lb
Approx. Dimensions: 19.3” (W) x 18.8” (D) x 21.5” (H)
Toner Yield 20K @ 5%
Power Source: 120 Volts, 50/60 Hz, 15 Amps
Power Consumption: Maximum 1.5kW (120V)
CPU: 1.2GHz (Quad-Core)
Memory: 2GB
Hard Disk Drive: 500GB HDD
e-BRIDGE Next Print Specifications
PDL: PostScript 3, PCL 6, PCL 5, PPDS, PDF v1.7, XPS, HTML,Direct Image, MS Office
Print Speed: 50 Pages Per Minute (LT)
Print Resolution: 1200 x 1200 dpi, 2400 Image Quality, 1200 Image Quality, 600 x 600 dpi, 300 x 300 dpi
Interface: Rear USB 2.0 Specification High Speed Certified Port (Type A), Front USB 2.0 Specification High Speed Certified Port (Type A), Gigabit Ethernet (10/100/1000), USB 2.0 Specification High Speed Certified Port (Type B), One Internal Card Slot
Wireless Device: WiFi Option/Internal 1284-B Bidirectional Parallel, Internal RS-232C Serial
Device Management: Embedded Web Server
Accessibility Features: Tilt Front Panel, 508 Accessibility Support, Voice Guidance
Scan Specifications
Scan Speed: DADF Scan: Mono - Up to 100 IPM Duplex, 50 IPM, Simplex Color - Up to 64 IPM Duplex, 32 IPM Simplex
Scan Modes: USB Thumbdrive, E-Mail, FTP, Network or USB Connected Computer, Windows Network Folder
Scan Resolution: 600 dpi (Max)
File Formats: TIFF, JPG (JPEG), PDF (Regular, Secure, Archival (PDF/A), Searchable, XPS
Image Compression: PDF 1 bit: CCITT G4, ZLIB (Flate), 8/24 bit: ZLIB (Flate), JPEG, MRC (Mixed Raster Content), TIFF 1 bit: CCITT G4, 8/24 bit – Packbits, LZW, JPEG, JPG 8/24 bit: JPEG, XPS, 1bit: ZLIB (Flate), 8/24 bit - JPEG, ZLIB (Flate)
Fax Specifications
Compatibility:Super G3
Transmission Speed: Approx. 3 Seconds Per Page
Fax Modem Speed: Up to 33.6 Kbps
Avenir Light is a clean and stylish font favored by designers. It's easy on the eyes and a great go-to fo
Toshiba Driver Plugins
Combine documents, perform batch printing and more with driver plugins
Toshiba’s driver plugins assist in optimising your print jobs. Our host of e-Bridge software driver applications enhance the management of complex, large-scale printing tasks. Learn more about our driver plugins below.
Toshiba e-Bridge Job Point eXTM
Large print jobs can be a challenge, even for high-volume printers. With Toshiba's e-BRIDGE Job Point eX, you can easily increase your productivity by printing on up to ten Toshiba devices at the same time. This multiplies your print speed by ten for fast and efficient document output. e-BRIDGE Job Point eX integrates into the easy-to-access Toshiba Universal Printer Driver and increases its functionality. The software automatically detects all Toshiba MFDs within a network and is capable of splitting a print job across various devices. The copies are then printed on these systems at the same time, significantly reducing the time needed to finish a large print job.
-
Increase your productivity by splitting large print jobs and printing simultaneously on several Toshiba e-STUDIO devices.
-
Combine the output speed of up to ten Toshiba MFDs to accelerate your efficiency.
-
Print on any Toshiba e-BRIDGE MFD in the network by sending your print job to multiple destinations with just one click.
-
Benefit from the advantages of e-BRIDGE JobPoint eX via the easy-to-use Toshiba Universal Printer Driver.
e-BRIDGE Job Point Brochure 2024
Toshiba e-Bridge Job Build eXTM
Toshiba's e-BRIDGE Job Build expands the capabilities of your Toshiba e-STUDIO Multifunction Device (MFD) by allowing it to combine multiple documents—of various file types, paper types, and document settings—into a single print job. Print multiple copies of each set quickly and easily. Reduce costs by switching between colour and black-and-white printing within the same job as needed. Eliminate time-consuming sorting and hand collating.
-
Print different document types (Word, PDF, Excel, etc.) together as a set
-
Switch between simplex and duplex printing within a single job
-
Select from different paper sources for each section of a print job
-
Combine A4 and A3 plus other paper sizes within a single job
-
Mix colour and black-and-white output
-
Use various paper weights and colours
-
Save time sorting and collating
e-BRIDGE Job Build Brochure 2024
Toshiba e-Bridge Job Separator eXTM
Toshiba's e-BRIDGE Job Separator further enhances your Toshiba e-STUDIO Multifunction Device (MFD) by allowing it to simply and easily perform batch printing from any Windows application. It does this by allowing the user to create multiple sets of a job, divided by a separation page. Think of the time you’ll save from sorting large sets of documents into batches.
-
Automatically inserts separation sheets
-
Easy to use — no training required
-
Improves workflow for successive, volume printing
-
Batch print multiple sets from any Windows application
-
Saves sorting time
-
Driver-based solution
-
Perfect for printing school class sets
e-BRIDGE Job Separator Brochure 2024
Toshiba e-Bridge Replicator eXTM
Toshiba's e-BRIDGE Replicator eX is a simple one-touch application for streamlining the creation of multi-part forms and documents such as invoices, receipts, and statements. If you need to print multi-part forms or documents on a regular basis, you'll know how painful it can be. Much better than old carbonless copy systems, e-BRIDGE Replicator eX is a simple yet effective software driver enhancement that automates multi-copy printing on plain paper. Simply print the same document to multiple paper sources to create different coloured copies that are easy to recognise and identify.
-
Easy to install and configure
-
Simple to use interface – print with just a few clicks
-
Streamline the creation and distribution of multi-part forms and documents such as invoices, receipts, and statements
-
Replace your old carbon-copy system with a fully automated plain paper process
-
Take advantage of the simplicity that e-BRIDGE Replicator eX offers, all from within your Toshiba Universal Print Driver.